Throttle Down Kustoms Jeep Frames are made out of 2"x4" 3/16" A500 tubing that is all Mandrel Bent in a CNC Mandrel Bending Machine. After the frames rails are bent Throttle Down Kustoms builds all of the necessary brackets and components for each individual frame out of 3/16" and 1/4" PNO plate that are all CNC Laser cut and bent to complete the frame. (Some stock running boards do not work the same, you may have to modify them to work)
Throttle Down Kustoms Frames include mounting locations for the following
-Front and Rear Upper and Lower Controll Arm mounts
-TDK Skid Plate INCLUDED WITH FRAME. (TDK Skid Plate patteren the stock TJ Skid Plate WILL NOT WORK WITH THE TDK TJ Frame)
-Sway Bar, Front and Rear
-Body Mounts, Grille Mount
-Rear Crossmember Standard
-Front and Rear Bump Stop Holes
-Motor Mount welded in (6cy)
-Steering Shaft Idler Mounting location
-Rear Coil Spring Mount
-Rear Shock Mounts with 5/16 Nuts welded in.
-Rear Track Bar Mount set up for stock rear track bar.
-Front Coil Spring Mount with Shock Mounts welded to frame
-Front Track Bar Mount, set up for Adjustable track bar witch comes with the TDK Frame.